MCOM - Product Details

product categories

MCOM301IO(4DI+4AI+3DO+2AO)

Model: MCOM301IO(4DI+4AI+3DO+2AO)

Name: (4DI+4AI+3DO+2AO)

Category: Remote IO Modules/Units

Discription:

The MCOM300IO provides 8 channels for digital input, 8 channels for digital output and 8 channels for

Analog input,analog outputs are 12 bit at ±10 V/ ±5 V/ 0 ~ 10 V/ 0 ~ 5 V /4 ~ 20mA, each of which features

photocouple isolation. The MCOM300IO supports source-type output, input is sink-type. Support RS485

Modbus RTUprotocol for communication and work as slave device. Provide DIP switch for modbus

device id and Baud rate selection.

Features
Specifications
Applications
Additional Information

Source-type Digital Outputs
Sink-type Digital Inputs
Photocouple Isolation
8-channel Single-ended for Analog input.
Resolution: 12 bitfor Analog input and output
2-channel Analog Output
Voltage Inputs and Current Inputs
Watchdog
DIP Switch for device configuration
Cost-effective
Wide Operating Temperature Range: -25 °C ~ +75 °C

Digital Input
Input Channels	4
Type	Wet Contact (Sink)
On Voltage Level	+12.0 VDC ~30 VDC
Off Voltage Level	+11 V max.
Input Impedance	10 K?, 0.66 W
Digital Output
Output Channels	3
Type	Open Collector (Source)
Max. Load Current	500 mA/channel
Load Voltage	+12 VDC ~ +30 VDC

Analog Input

Input Channels

4 Single-ended

Type

0 ~ 500 mV/ 0 ~ 1 V/ 0 ~ 2.5 V/ 0 ~ 5 V/ 0 ~ 10 V/ 0 ~ 20 mA/ 4 ~ 20 mA

Resolution

12-bit

Sampling Rate

100 Hz total

Accuracy

+/-0.1%

Zero Drift

+/- 20 ?V/°C

Span Drift

+/- 25 ppm/°C

Input Impedance

Voltage

10 M?

Current

100 ?

Overvoltage Protection

120 VDC

Open Wire Detection for 4 ~ 20 mA

Yes

Analog Output

Channels

Type

±10 V/ ±5 V/ 0 ~ 10 V/ 0 ~ 5 V/4 ~ 20 mA (per Select)

Resolution

12-bit

Accuracy

+/-0.2% of FSR

Voltage Output Capability

10 V @ 20 mA

Communication
Interface	RS-485
Format	(N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
Baud Rate	1200 ~ 115200 bps
Protocol	Modbus/RTU
Watchdog	Yes
LED Indicators
Power	1 LED as Power Indicator
RX	1 LED for commination
TX 1LED for commination
Power Requirements
Reverse Polarity Protection	Yes
Powered from Terminal Block	Yes, 12 ~ 30 VDC
Consumption	0.5 W Max.
Mechanical
Dimensions (W x L x H)	52 mm x 98 mm x 27 mm
Installation	DIN-Rail Mounting
Environment
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-30 °C ~ +75 °C
Humidity	10 ~ 95% RH, Non-condensing

Industrial Automation
Industrial Machinery
Building Automation
Food and Beverage Systems
Semiconductor Fabrication
Control Systems

About MCOM Technology

Modern Communication Technology found in 2011. Specialized in Cellular M2M RTU, Cellular IoT Gateway, RF Gateway, Industrial Remote IO Modules manufacturing and IoT Cloud Platform development, Provides One Step Complete IoT Solutions. Since from the beginning, Modern Communication Technology has been dedicated to the improvement of IoT solution technology and the development of new and innovative IoT solutions to address the increasingly rigorous demands Globally.