product categories
MCOM300BAT
MCOM300BAT is an ultra-low power wireless RTU with data logging and alarming capabilities via SMS and GPRS. The battery powered RTU incorporates a GSM/GPRS modem, a serial port RS232 OR RS485, 2 digital inputs and 2 digital pulse input. A Lithium Thionyl battery provides autonomous operation for up to 4 years. It is suitable for remote gas and water metering applications.
- Features
- Specifications
- Applications
- Additional Information
·
2
Digital inputs, 2 pulse inputs, dry contact, NO/NC.
·
Counters
2, 100Hz max
·
RS485
Modbus RTU.
·
The
Infinite advantage
·
MCOM300
utilizes a dual processor architecture in order to combine extreme low power
consumption with advanced processing and communication capabilities. A system
controller (ultra-low power MCU) is in continuous operation scanning the digital
inputs for alarm condition detection. A powerful communication processor,
switched on and off by the system controller, performs all data processing and
controls communications through the internal wireless MODEM. The result is up
to 50% power economy in compare with respective units of the competition, while
performing the same tasks.
·
Setup
and Remote Configuration
·
The
unit can be programmed locally through the serial port or remotely via SMS by
using simple ASCII configuration commands. The command set features commands
for configuring input alarm parameters, scaling parameters and alarm limits,
timing parameters and defining user. MCOM300BAT can be remotely reconfigured by
sending configuration commands via SMS to the unit during the periodical status
message processing.
Cellular Interface
·
Standards:
GSM/GPRS
·
GPRS/EDGE:
850/900/1800/1900 MHz
·
SIM:
1 x (3V & 1.8V)
·
Antenna
Interface: SMA Female, 50 ohms impedance.
·
Ultra-low
power 32-bit high performance microcontroller MCU
·
Remote
water metering
·
Remote
gas metering
·
Remote
leakage detection for gas and water
Copyright © 2024. MODERN COMMUNICATION TECHNOLOGY. All rights reserved.